BSP – Hydraulic Drop Hammer (CG)
About BSP – Hydraulic Drop Hammer (CG)
Designed for driving a variety of bearing piles via piling rigs, leaders or crane suspended with ultimate load bearing up to 14,500 kN.
The highly efficient BSP hydraulic actuator can, for given blow rate and energy transference, give the operator lower fuel costs and less exhaust emissions. Noise emissions are reduced with improved dolly material, sound attenuating panels and helmet shrouding.
How can we help?
“We have a wide range of hydraulic drop hammers in our rental fleet. Call us today to discuss your project so that we can match you to the best hammer for your needs.”
Kieran
Models
| Ram Mass (kg) | 12000 |
|---|---|
| Max. Impact Energy (kNm) | 176 |
| Blow Rate (bpm) | 34 |
| Available to buy? | No |
| Available to rent? | Yes |
| Download Specification Sheet | |
| Make a hire enquiry | |
| Ram Mass (kg) | 14000 |
|---|---|
| Max. Impact Energy (kNm) | 206 |
| Blow Rate (bpm) | 36 |
| Available to buy? | No |
| Available to rent? | Yes |
| Download Specification Sheet | |
| Make a hire enquiry | |
| Ram Mass (kg) | 16000 |
|---|---|
| Max. Impact Energy (kNm) | 235 |
| Blow Rate (bpm) | 34 |
| Available to buy? | No |
| Available to rent? | Yes |
| Download Specification Sheet | |
| Make a hire enquiry | |
| Ram Mass (kg) | 20000 |
|---|---|
| Max. Impact Energy (kNm) | 294 |
| Blow Rate (bpm) | 34 |
| Available to buy? | No |
| Available to rent? | Yes |
| Download Specification Sheet | |
| Make a hire enquiry | |
Specification Table
| Model | CG180 | CG210 | CG240 | CG300 |
|---|---|---|---|---|
| Available to buy | No | No | No | No |
| Available to hire | Yes | Yes | Yes | Yes |
| Technical Specifications | ||||
| Ram Mass (kg) | 12000 | 14000 | 16000 | 20000 |
| Max. Impact Energy (kNm) | 176 | 206 | 235 | 294 |
| Blow Rate (bpm) | 34 | 36 | 34 | 34 |
| Operating Pressure (bar) | 180 | 260 | 280 | 280 |
| Hydraulic Flow Required (L/min) | 380 | 400 | 400 | 420 |
| Typical Dimensions | ||||
| Basic Hammer - Length (mm) | 6270 | 6270 | 6930 | 7590 |
| Basic Hammer - Weight (kg) | 17300 | 19350 | 21700 | 26000 |
| Hammer Length (Sheet Piles) (mm) | ||||
| Hammer Weight (Sheet Piles) (kg) | ||||
| Hammer Length (Tube Piles) (mm) | 9050 | 9370 | 9810 | 11310 |
| Hammer Weight (Tube Piles) (kg) | 23750 | 25800 | 34200 | 46000 |
| Additional information | ||||
| Specification Sheet | Download | Download | Download | Download |
| Hire Enquiry? | Hire Enquiry | Hire Enquiry | Hire Enquiry | Hire Enquiry |
Configuration
We have a range of commonly used add-ons that can overcome various every-day piling challenges and these can be found on the right.
If you’re not sure what you need, just call us. We’ll be happy to help.
Models can be fitted with
Extension Hoses
Allows for a greater distance between the power pack and the hammer..
Timber Box Clamps
Sheet Clamp
Hydraulic Vibratory Hammer Pile Extension
Tube Clamps
Pile Types: Install and Extract
Z Single Piles
Z Double Piles
U Single Piles
U Double Piles
H Piles
Straight Web Sections
Tube Piles
Timber Piles
Concrete Piles
Trench Sheets
Box Piles
Further Info
- Special solutions for different ground conditions and depths
- Different clamp systems for different pile types
- Can endure the most difficult loading conditions
- Strong, high quality, long lasting and economical
- Work close to highly sensitive structures or services
- Work under water
- High pulling force
Our benefits to you
Bespoke Configuration
We can configure equipment to suit your requirements.
Dedicated Support
Modern Equipment
Gallery
About BSP